日本PEACOCK孔雀量表C-700数显电子计数器孔雀量表C-700数显电子计数器深圳市奥莱德精密仪器有限公司

所在位置: 首页> 产品目录> 日本PEACOCK孔雀> 电子显示器>

产品中心

产品详情

查看大图

产品名称：日本PEACOCK孔雀量表C-700数显电子计数器
产品型号：孔雀量表C-700数显电子计数器
产品厂商：日本PEACOCK孔雀
产品文档：

你添加了1件商品查看购物车

简单介绍：

日本PEACOCK孔雀量表C-700数显电子计数器日本PEACOCK孔雀量表C-700数显电子计数器

详情介绍：

Equipped with large display functions and various measurement functions our Digital Counters
can be installed in a Control Panel or placed on a desk due to their compact designs.

Specifications of Digital Counters

Model

C-500

C-700

Displayed digits
	Selection of 10?m
	Selection of 1?m
Display

-9999.99 -- 00.00 -- 9999.99

-999.999 -- 0.000 -- 999.999

High-luminance LED display with 7 segments (red)

Power supply voltage
& power consumption

AC100V -- AC240V
/ 9VA or lower

Operating temperature

0 -- +40?C

Compatible Linear Gauges
	Selection of 10?m display
	Selection of 1?m display

DL-2 D-5 D-10 D-20 D-30 D-50 D-100 DN-10 DN-20 D-5UZ

DL-2S D-5S D-10S D-20S D-30S D-50S D-100S DN-10S DN-20S

Accessories

AC power cord (2m) ; One cord
Metal fittings for panel installation ; Two units
	( to be used for installation in panel and securing stand fittings )
Stand fittings ; One unit
	( to be used when counter is used as desktop device )

Terminal block functions
( Rear panel )

Terminal block	--> Screwless terminal block
Usable electric cables	--> AWG22 - 28
Length of peeled wire of cables	--> 8 - 9mm

Pin alignment
(*1)	St/Sp	Controls "START" and "STOP" of MAX MIN P-P measurement mode.
(*2)	React	Controls "SUSPEND" and "START" of P-P measurement mode.
3	Latch	Controls "LATCH" and "CANCEL" of measured value.
4	Reset	External "RESET" "PRESET" ( Function available only in Model No. C-700 )
5	Alarm	Error signal output
				Max Display	Min Display	P-P Display
(*6)	-NG	Outputs -NG based on OK±NG judgment (red LED).	-->	+NG(2)	-NG(1)	NG(2)
(*7)	OK	Outputs OK based on OK±NG judgment (green LED).	-->	OK	OK	OK
(*8)	+NG	Outputs +NG based on OK±NG judgment (orange LED).	-->	+NG(1)	-NG(2)	NG(1)
				(1) : NG output in first stage (2) : NG output in second stage
9	GND	GND
(* )	Circled numbers indicate functions available only in Model No. C-700

Dip sw setting functions
( Printed circuit board )

Dip(1)		Dip(2)
SW 1	Select 1?m or 10?m	SW 1	Settings by Manufacturer
SW 2	Select direction of counting.	SW 2	Select whether or not to include default values for OK±NG judgment.
SW 3	Select activation or non- activation of error output.	SW 3	Select either "orthogonal" or "sine" for input waveform.
SW 4	Select activation or non- activation of overflow.	SW 4	Select either 400msec or 100msec for RESET time.

Data output (RS-232C)
D-Sub9P plug
INCH screw

Options
	Excel input software
	BCD output board

Pin Alignment
1	NC	--	Communication mode ; Half-duplexasynchronouscommunication
2	Rxd	in <--	Communication speed ; 9600bps
3	Txd	--> out	Format ; 7Bit ASCI I
4	NC	--	Parity ; even number
5	SG	--	Stop bit ; 1Bit
6	NC	--	RTS / CTS ; Returned when not in use.
7	RTS	--> out	Reception command ; Transmission request ASCI I [T] [t]
8	CTS	in <--	; Reset ASCI I [R] [r]
9	NC	--	Connection cables ; Cross cables ( not included )

PK-2002		; Data imported into Excel cells from RS-232C output.
CB-BCD		; Cannot be used in combination with RS-232C output.

Display functions

1/1 display	--> Displays the measured value as is.
1/2 display	--> Displays the measured value after halving it.
×2 display	--> Displays the measured value after doubling it.